|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|
10
|
1
|
Handwashing sinks supplied & accessible |
Yes |
No
|
No |
6-301.12 - Pf Each HANDWASHING SINK or group of adjacent HANDWASHING SINKS shall be provided with individual, disposable towels, a continuous towel system that supplies the user with a clean towel or a heated-air hand drying device or a hand drying device that employs an air-knife system that delivers high velocity, pressurized air at ambient temperatures. Hand sink paper towel dispenser observed with dead batteries during inspection. Employee replaced battery during inspection. CDI |
|
28
|
1
|
Toxic substances properly identified stored & used |
Yes |
No
|
No |
7-201.11 - P POISONOUS OR TOXIC MATERIALS shall be stored so they can not contaminate FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLESERVICE and SINGLE-USE ARTICLES by Separating the POISONOUS OR TOXIC MATERIALS by spacing or partitioning; and locating the POISONOUS OR TOXIC MATERIALS in an area that is not above FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE or SINGLE-USE ARTICLES. Chemical spray bottle observed stored on top of hot holding unit next to roast beef prep. Employee moved bottle to proper storage area during inspection. CDI |
|
40
|
0
|
Personal cleanliness |
No |
No
|
No |
2-402.11 - C FOOD EMPLOYEES shall wear hair restraints such as hats, hair coverings or nets, beard restraints, and clothing that covers body hair, that are designed and worn to effectively keep their hair from contacting exposed FOOD; clean EQUIPMENT, UTENSILS, and LINENS; and unwrapped SINGLE-SERVICE and SINGLE-USE ARTICLES. Employees observed without hair restraints during inspection. Educated PIC on proper hair restraint use. |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-501.11 (A) - C EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. Front plastic corner of slicer observed with trim cracked in poor repair. Facility is currently working on replacement for trim piece to ensure equipment is in good repair and easily cleanable. |
|
49
|
0
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11(C) - C NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris. Prep table with wheels beside beside dryers observed with grease build up on legs, shelf and castors. Informed PIC to clean as often as needed. |
|