|
10
|
0
|
Handwashing sinks supplied & accessible |
Yes |
No
|
No |
5-205.11 Using a Handwashing Sink - Operation and Maintenance (Pf) - Hand sink by dish machine observed blocked by large trash can. Other hand sinks fully accessible. (A) A HANDWASHING SINK shall be maintained so that it is always accessible for EMPLOYEE use. CDI - PIC moved trash can. |
|
33
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Cooling Methods (Pf) - Observed tightly sealed lettuce and cheese from prep in low reach makeline cooler. (A) Cooling shall be accomplished by using one or more of the following methods based on the type of FOOD being cooled: (1) Placing the FOOD in shallow pans; (2) Separating the FOOD into smaller or thinner portions; (3) Using rapid cooling EQUIPMENT; (4) Stirring the FOOD in a container placed in an ice water bath; (5) Using containers that facilitate heat transfer; (6) Adding ice as an ingredient CDI - Containers vented to facilitate air flow. |
|
41
|
0
|
Wiping cloths: properly used & stored |
No |
No
|
No |
3-304.14 Wiping Cloths, Use Limitations (C) - Wet wiping cloths observed stored on shelf in front of grill.(B) Cloths in-use for wiping counters and other EQUIPMENT surfaces shall be:(1) Held between uses in a properly mixed sanitizer solution |
|
47
|
1
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-501.11 Good Repair and Proper Adjustment - Equipment (C) - REPEAT- Gasket observed torn on standing 1 door cooler. Equipment is to be maintained in good working order. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. PIC currently has a work order for gasket / awaiting maintenance. |