|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11 (A) Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils - Pf -- Observed tongs in the clean dish area with dried food residue on the surface. Equipment food contact surfaces and utensils shall be clean to sight and touch. The dishes were sent to the dish area to correct the violation. |
|
20
|
1.50
|
Proper cooling time & temperatures |
Yes |
No
|
No |
3-501.14 Cooling - P -- Observed hashbrown casserole prepared 6.5 hours, cooling in the line reach-in, stored at 49°F. TCS foods shall cool within 2 hours from 135°F to 70°F and within a total of 6 hours from 135°F to 41°F or less The casserole was voluntarily discarded to correct the violation.
3-501.14 Cooling - P -- Observed cut lettuce in the reach-in sandwich unit, cut at ambient temperature 4.5 hours prior to inspection, holding at 45°F. Food shall be cooled within 4 hours to 41°F or less if prepared from ingredients at ambient temperature. The lettuce was voluntarily discarded to correct the violation. |
|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
Yes
|
No |
3-501.15 Cooling Methods - Pf -- Observed a container of hashbrown casserole and cut lettuce, covered tightly and cooling in the small line reach-in coolers. The following are effective means to properly cool food: (1) Placing the food in shallow pans, (2) Separating the food into smaller or thinner portions, (3) Using rapid cooling equipment, (4) Stirring the food in a container placed in an ice water bath, (5) Using containers that facilitate heat transfer, (6) Adding ice as an ingredient, or (7) Other effective methods. The containers were both discarded since parameters were not met, for correction. |