|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
No |
No
|
No |
4-601.11(A) - Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils: (4) In EQUIPMENT such as ice bins and BEVERAGE dispensing nozzles and enclosed components of EQUIPMENT such as ice makers, cooking oil storage tanks and distribution lines, BEVERAGE and syrup dispensing lines or tubes, coffee bean grinders, and water vending EQUIPMENT: (a) At a frequency specified by the manufacturer, or (b) Absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold. ***Observed pink residue on the baffle of the ice machine. |
|
21
|
1.50
|
Proper hot holding temperatures |
Yes |
Yes
|
No |
3-501.16 - Potentially Hazardous Food (Time/Temperature Control for Safety Food), Hot and Cold Holding: Maintain TCS foods in hot holding at 135F or above. P ***Pepperoni and cheese pizzas in the oven were between 120F to 129F. PIC stated they were delivered at 11:00am, it was 12:05pm. CDI, PIC reheated pizzas in the oven and the pizzas were between 140F and 142F. |
|
36
|
0
|
Thermometers provided & accurate |
Yes |
No
|
No |
4-302.12 - Food Temperature: Provide an accessible thermometer for use. Provide a thin probe thermometer for accurate measure of thin foods. Pf ***During the inspection, there thin-probe thermometers did not turn on. CDI, PIC obtained a thin-probe thermometer. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 - Good Repair and Proper Adjustment: Equipment shall be maintained in good repair. ***The gasket on the ice machine is no longer in good repair. |
|
51
|
0
|
Plumbing installed; proper backflow devices |
No |
No
|
No |
5-205.15 - System Maintained in Good Repair: Maintain a plumbing system in good repair. ***At the 3-compartment sink there is a leak located at the base of the faucet. |