|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
Observed recently cleaned stainless steel pans with food debris. Cleaned utensils must be clean to sight and touch. CDI-by placing by the dish machine to be rewashed and sanitized. 4-601.11(A) Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils - PF |
|
22
|
0
|
Proper cold holding temperatures |
Yes |
No
|
No |
Observed a few cold holding items on the cold line for the take-out window holding above 41F. See temperature log for details and also #47. TCS food shall be held cold at 41F or less. CDI-by relocating the product to the walk-in cooler and on ice bath to quickly cool back down. 3-501.16 (A)(2) Time/Temperature Control for Safety Food, Hot and Cold Holding - P |
|
33
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
Observed pans of recently prepared/shredded cheese tightly covered and stacked on each other (reading 45-47F) while in the process of cooling inside the walk-in cooler and also not on an ice bath per Chipotle procedure. Make sure there are enough ice baths prepared to cool down all prepared shredded cheese. Also, when product is placed in the walk-in cooler, food containers in which food is being cooled shall be arranged in the equipment to provide maximum heat transfer through the container walls; and loosely covered, or uncovered if protected from overhead contamination as specified under Subparagraph 3-305.11(A)(2), during the cooling period to facilitate heat transfer from the surface of the food. CDI-by preparing additional ice baths for the shredded cheese. 3-501.15 (B) - C
Likely, the shredded cheese placed on the take-out window cold line was from this recently shredded batch. Make sure this cheese is cooled to 41F or less before being placed on the cold line. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
Observed the take-out window cold line not appearing to be working properly. The air indicating thermometer was reading at 41F and the unit was set on the lowest temperature setting. Advise to have checked out for proper operation. The air temperature of the unit should be reading closer to 37-38F. 4-501.11(A) Good Repair and Proper Adjustment-Equipment - C |