|
2
|
0
|
Certified Food Protection Manager |
No |
No
|
No |
2-102.12 (A) PIC shall demonstrate knowledge by being a certified food protection manager.
Observed no Certified Food Protection Manager on site during inspection. Facility is not required to have one on site until 10/13/26.
0 pts.
For more information on becoming a certified food protection manager please visit: www.mecknc.gov/foodsafety |
|
10
|
0
|
Handwashing sinks supplied & accessible |
Yes |
No
|
No |
6-301.14 Post a handwash sign at each handsink.
Observed no handwashing sign at handsink in women’s room during inspection.
CDI - REHS provided.
0 pts. |
|
22
|
1.50
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P
Observed various TCS foods holding above 41F in RIC during inspection. See temperature chart. Ambient in unit observed between 38F and 42F.
CDI - All out of temperature foods voluntarily discarded. Maintenance contacted during inspection to assess unit.
1.5 pts.
For more information, please visit: www.mecknc.gov/foodsafety or view our training videos at the following weblinks: What are TCS Foods https://www.youtube.com/watch?v=q0iLZb7v0UM and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ . |
|
48
|
0.50
|
Warewashing facilities: installed, maintained & used; test strips |
No |
No
|
Yes |
4-302.13 (B) Provide an approved Max/Min thermometer for testing sanitizing temperatures in hot water warewashing machines. The thermometer must be readily accessible. -Pf
Observed no Min/Max thermometer on site during inspection. Acquisition necessary.
10 day VR required.
0.5 pts. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.11 Floors, walls, and ceilings including the attachments such as soap and towel dispensers; light fixtures; and heat/ac vents shall be maintained in good repair.
Observed no baseboard under three comp sink, base boards near dry storage area damaged, wall next to back door damaged, and wall edging near coffee machines damaged during inspection. Repair necessary as is outlined in transitional permit non-compliant conditions.
0 pts. |