|
10
|
1
|
Handwashing sinks supplied & accessible |
Yes |
No
|
No |
5-205.11 (B) A handwashing sink may not be used for purposes other than handwashing Pf. Observed metal cup stored inside hand washing sink next to soft serve machine. CDI - PIC moved metal cup to 3-comp-sink. |
|
43
|
0
|
In-use utensils: properly stored |
Yes |
No
|
No |
3-304.12 (F) Containers of water used for storing in-use utensils must be maintained at a temperature of at least 135 F and cleaned at least every 24 hours or when container has accumulated soil or residue. Observed in-use stirring spoons housed in metal cup with water/debris. Equipment was cleaned some point on Saturday. CDI - PIC moved cup with stirring spoons to 3-comp-sink. |
|
49
|
0
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed behind and underneath soda machine debris and build up. Increase frequency of cleaning area.
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed wired storage racks inside WIC with food debris and build up. Increase frequency of cleaning racks. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure. Observed walls around fryer and 3-comp-sink with food debris and build up. Increase frequency of cleaning area. |
|
56
|
0
|
Meets ventilation & lighting requirements; designated areas used |
No |
No
|
No |
6-501.14 Change the filters and clean the intake and exhaust air ducts so they are not a source of contamination by dust, dirt or other materials. Observed hood filers and surrounding panels with grease and debris build up. Increase frequency of cleaning unit. |