| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|
3
|
0
|
Management, food & conditional employee; knowledge, responsibilities & reporting |
Yes |
No
|
No |
2-103.11 (O) Person in Charge (Pf) (P) Written procedures and plans, where specified by this Code and as developed by the FOOD ESTABLISHMENT, are maintained and implemented as required. PIC doesn't have a healthy policy. EHS provided one. |
|
5
|
0
|
Procedures for responding to vomiting & diarrheal events |
Yes |
No
|
No |
2-501.11 Clean-up of Vomiting and Diarrheal Event (Pf).A FOOD ESTABLISHMENT shall have written procedures for EMPLOYEES o follow when responding to vomiting or diarrheal events that involve the discharge of vomitus or fecal matter onto surfaces in the FOOD ESTABLISHMENT. The procedures shall address the specific actions EMPLOYEES must take to minimize the spread of contamination and the exposure of EMPLOYEES, consumers, FOOD, and surfaces to vomitus or fecal matter. PIC doesn't have a written vomit and diarrheal events plan. CDI: EHS provided PIC with one. |
|
10
|
0
|
Handwashing sinks supplied & accessible |
Yes |
No
|
No |
6-301.14 Handwashing Signage (C) A sign or poster that notifies FOOD EMPLOYEES to wash their hands shall be provided at all HANDWASHING SINKS used by FOOD EMPLOYEES and shall be clearly visible to FOOD EMPLOYEES. EHS observed handwashing stations without handwashing signs. CDI: EHS provided PIC with handwashing signs.
5-205.11 Using a Handwashing Sink - Operation and Maintenance (Pf) B) A HANDWASHING SINK may not be used for purposes other than handwashing. EHS observed PIC obtain water from a handwashing station. CDI: EHS explained handwashing procedures to PIC. PIC sanitized that handwashing station. |
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11 (A) Equipment, Food-Contact Surfaces, Nonfood Contact Surfaces, and Utensils (A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be
clean to sight and touch. Pf B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. EHS observed utensils with grease deposits. DI: PIC voluntarily rewashed utensils. |
|
23
|
1.50
|
Proper date marking & disposition |
Yes |
No
|
No |
3-501.17 Ready-To-Eat Time / Temperature Control for Safety Food, Date Marking (Pf) (A) Except when PACKAGING FOOD using a REDUCED OXYGEN
PACKAGING method as specified under § 3-502.12, and except as pecified in (E) and (F) of this section, refrigerated, READY-TOEAT, TIME/TEMPERATURE CONTROL FOR SAFETY FOOD prepared and held in a FOOD ESTABLISHMENT for more than 24 hours shall be clarly marked to indicate the date or day by which the FOOD shall be consumed on the PREMISES, sold, or discarded when held at a temperature of 5C (41F) or less for a maximum of 7 days. The day of preparation shall be counted as Day 1. EHS observed cheese and milk without proper date marking. CDI: PIC voluntarily added date marks. |
|
33
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Cooling Methods (Pf) (A) Cooling shall be accomplished in accordance with the time and temperature criteria specified under § 3-501.14 by using one or more of the following methods based on the type of FOOD being cooled:(1) Placing the FOOD in shallow pans; Pf 2) Separating the FOOD into smaller or thinner portions. (B) When placed in cooling or cold holding EQUIPMENT, FOOD
containers in which FOOD is being cooled shall be: 1) Arranged in the EQUIPMENT to provide maximum heat transfer through the container walls; and 2) Loosely covered, or uncovered if protected from overhead contamination as specified under Subparagraph 3-305.11(A)(2), during the cooling period to facilitate heat transfer from the surface of the FOOD. EHS observed pans fully covered during the cooling process along with food items being cooled in large containers. CDI: PIC voluntarily unwrapped food items to facilitate proper cooling. EHS also recommended moving larger items into smaller containers for better cooling.
3-501.15 Cooling Methods (Pf) (A) Cooling shall be accomplished in accordance with the time and temperature criteria specified under § 3-501.14 by using one or more of the following methods based on the type of FOOD being cooled:Using rapid cooling EQUIPMENT. Observed sliced tomatoes cooling in the prep cooler. EHS advise to pre-chill in reach in cooler or use Time as a Public Health Control (TPHC). TPHC documents will be left with PIC. They agreed to discard the sliced tomatoes around 2pm after service. CDI. (Observation made my guiding EHS and not Intern leading the inspection for training).
Cooling method documents will be handed to PIC. |
|
37
|
0
|
Food properly labeled: original container |
No |
No
|
Yes |
3-302.12 Food Storage Containers Identified with Common Name of Food (C) Except for containers holding FOOD that can be readily and unmistakably recognized such as dry pasta, working containers
holding FOOD or FOOD ingredients that are removed from their original packages for use in the FOOD ESTABLISHMENT, such as cooking oils, flour, herbs, potato flakes, salt, spices, and sugar shall be identified with the common name of the FOOD. Observed sauce and oil bottles without labels. Also observed BBQ sauce in an old ketchup bottle.
Oils bottles can be labeled with rubber bands using a color coding system. Do not reuse containers without completely removing the old container packaging to avoid confusing food items or ingredients.
This violation was observed by guiding EHS and not leading intern. |
|
44
|
0
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
No
|
No |
4-903.11 (A), (B), and (D) Equipment, Utensils, Linens and Single-Service and Single-Use Articles Storing (C)(B) Clean EQUIPMENT and UTENSILS shall be stored as specified under (A) of this section and shall be stored: (1) In a self-draining position that allows air drying; and Covered or inverted. EHS observed utensils that were not inverted with the food contact portion raised up. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
Yes |
4-202.11 Food-Contact Surfaces - Cleanability (Pf) (A) Multiuse FOOD-CONTACT SURFACES shall be: 1) SMOOTH;
(2) Free of breaks, open seams, cracks, chips, inclusions, pits, and similar imperfections; (3) Free of sharp internal angles, corners, and crevices; Finished to have SMOOTH welds and joints. EHS observed utensils that had chips, cracks, and imperfections. CDI: PIC voluntarily discarded utensils. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-201.11 Floors, Walls and Ceilings - Cleanability (C) Except as specified under § 6-201.14 and except for antislip floor coverings or applications that may be used for safety reasons,floors, floor coverings, walls, wall coverings, and ceilings shall be designed, constructed, and installed so they are SMOOTH and EASILY CLEANABLE. Observed indentions in the concrete floor of food prep area which makes the floor not smooth and easily cleanable.
PIC is aware of this for cleaning,which is good. EHS just wants to document physicals facility integrity at establishment. Observation made by guiding EHS and not leading intern. |