Select your filters and click the Search button to search for data, or click Clear to clear all filters
 
Logo Main Menu
Mecklenburg County Health Dept
Public Health Inspections
Select your filters and click the Search button to search for data, or click Clear to clear all filters
 
  
 

Premises Information

Return to Inspections
NamePACES SOUTH END, THE
Address255 W BLAND ST
 
City/State/ZIP
CHARLOTTE NC 28203
Premise Type53 - Year-Round Swimming Pool
CountyMecklenburg
Inspection Date 10/6/2025
Final Score @ Grade
8
General CommentsHeater was not evaluated this inspection. It was not turned on and is going to be replaced. Ensure that the items around the pool are kept at least 6 feet back from the edge of the water. Do not use breakable light bulbs over the pool deck. Permit Restriction: Pool pump flow must be at least 76gpm for turnover and cannot exceed 138gpm for skimmer pipe size. Flow meter must remain operational. Built without main drains. Provide sump pump or another approved method for draining pool. Access to heater through residence unit required to be maintained.Note: Pool heater under pool vault and must be accessed through residence unit

Violations

 
CDI=Corrected During Inspection  R=Repeat Violation  VR=Verification Required 
Violation Item Demerits Violation Description CDIRVRComments
8 4 Pool maintenance: surface skimmers (with weirs, baskets and covers) or gutters clean, in good repair, and functioning properly, no floating debris No No No .2518(k) Replace missing weirs. Observed 1 weir missing out of 3 total skimmers. No Permit Action taken, more that 50% are in place.
16 4 Premises: fence or barrier with self-closing, self-latching gates properly constructed and maintained No No No .2528(a) Gate latches located at less than 54" shall require the use of key, combination lock or card reader or be located on the inside of the gate at least three inches below the top of the gate with no greater than 1/2" within 18" of latch mechanism. Observed gap between the fence and gate to be at .75 inches. Observed the mesh pattern of the fence and gate to be greater than .5 inches in length horizontally. These gaps must be corrected. I.T.S. Issued. Deadline is 11/5/2025