|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 - Pf Cooling shall be accomplished in accordance with the time and temperature criteria specified under § 3-501.14 by using one or more of the following methods based on the type of FOOD being cooled: placing the FOOD in shallow pans, separating the FOOD into smaller or thinner portions, using rapid cooling EQUIPMENT, stirring the FOOD in a container placed in an ice water bath, using containers that facilitate heat transfer, adding ice as an ingredient or other effective methods. Rice and beef observed in large/deep bucket containers cooling with lids on. Rice portioned into small pans and placed on ice. Beef reheated during visit. CDI |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11(B) - C EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. Gasket on tall reach in cooler observed torn. Replace gasket to ensure door properly seals. |
|
48
|
0
|
Warewashing facilities: installed, maintained & used; test strips |
Yes |
No
|
No |
4-302.14 - Pf A test kit or other device that accurately measures the concentration in mg/L of SANITIZING solution shall be provided. Test strips provided have previously been wet thus are no longer accurate. Test strips given during visit. CDI |