| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|
1
|
1
|
PIC Present, demonstrates knowledge, & performs duties |
No |
Yes
|
No |
2-102.11 - Demonstration: PIC shall demonstrate knowledge by being a certified food protection manager. ***No certified food protection manager available during the inspection and priority item out of compliance. |
|
2
|
1
|
Certified Food Protection Manager |
No |
Yes
|
No |
2-102.12 - Certified Food Protection Manager: At least one employee who has supervisory and management responsibility and the authority to direct and control food preparation and service shall be a certified food protection manager. ***No certified food protection manager on duty during the inspection. |
|
15
|
0
|
Food separated & protected |
Yes |
No
|
No |
3-302.11 - Packaged and Unpackaged Food - Separation, Packaging, and Segregation: Food shall be protected from cross contamination by separation during storage, preparation, holding, and display. P ***In the new 2-door reach-in cooler, personal, raw eggs were being stored over queso. Raw chorizo was being stored over whole cut beef in the old 2-door reach-in cooler. CDI: Items rearranged to obtain proper storage order. |
|
21
|
0
|
Proper hot holding temperatures |
Yes |
No
|
No |
3-501.16 - Potentially Hazardous Food (Time/Temperature Control for Safety Food), Hot and Cold Holding: Maintain TCS foods in hot holding at 135F or above. P ***In the hot hold table, steak temped at 133F. .CDI: Steak was reheated and temped at 178F. |
|
22
|
1.50
|
Proper cold holding temperatures |
No |
No
|
Yes |
3-501.16 - Potentially Hazardous Food (Time/Temperature Control for Safety Food), Hot and Cold Holding: Maintain TCS foods in cold holding at 41F or less. P ***The 3-door reach-in cooler had an ambient of 45F. The mozzarella cheese and salsa temped at 45-46F. The mozzarella cheese was delivered today, so it was relocated to the new 2-door reach-in cooler. The salsa was date marked 5/6, so it was voluntarily discarded by the PIC. A 72 hour verification visit will be conducted on for the 3-door reach-in cooler.
***The cold hold table had hot sauce, salsa, tomato, lettuce and mozzarella cheese temped at 43-54F. The restaurant had been open less than 1 hour and the unit had been filled right before opening. The items were placed in the 1-door reach-in freezer to cool back down to 41F or below before being placed back into the cold hold table. It is recommended that the unit be turned on and below 41F before filling with items each day. CDI: Items were cooling and temped at 40-46F by the end of the inspection. |
|
39
|
0
|
Contamination prevented during food preparation, storage & display |
No |
No
|
No |
3-305.11 - Food Storage: Store food in a clean, dry location, not exposed to contamination. Keep at least 6 inches above the floor. ***Multiple white tubs with lids containing dry goods such as rice were being stored on the floor in the dry storage room. |
|
43
|
0.50
|
In-use utensils: properly stored |
No |
Yes
|
No |
3-304.12 - In-Use Utensils, Between-Use Storage: Store in-use utensils in a clean, dry place, in food with handles out, in 135F or greater water or in running water which quickly moves food particles to the drain. ***Plastic containers without handles were being stored in dry goods. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 - Good Repair and Proper Adjustment: Equipment components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted. ***The gasket is torn on the short 1-door reach-in near the cook line.
4-205.10 - Food Equipment, Certification and Classification: Except for toasters, mixers, microwave ovens, water heaters, and hoods, food equipment shall be used in accordance with the manufacturer's intended use and certified or classified for sanitation by an ANSI-accredited certification program. ***A Ninja air fryer was sitting on the prep table and is labeled “for household use only”. |
|
48
|
0.50
|
Warewashing facilities: installed, maintained & used; test strips |
No |
No
|
Yes |
4-302.14 - Sanitizing Solutions, Testing Devices: A test kit or other device that accurately measures the concentration in mg/L (or ppm) of sanitizing solutions shall be provided. Pf ***No test strips were available to test the sanitizer. A 10 day verification visit will be conducted to verify that test strips have been obtained. |
|
49
|
0.50
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11 - Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils: Non-food contact surfaces and utensils shall be clean to sight and touch. ***The inside of the 1-door reach-in freezer has debris in it. The short 1-door reach-in at the cook line has debris in it. |
|
51
|
0
|
Plumbing installed; proper backflow devices |
No |
Yes
|
No |
5-205.15 - System Maintained in Good Repair: Maintain a plumbing system in good repair. ***The faucet at the 3-comp sink has a heavy leak at the base of the faucet. |
|
56
|
0
|
Meets ventilation & lighting requirements; designated areas used |
No |
No
|
No |
6-403.11 - Designated Areas: Areas designated for employees to eat, drink, and use tobacco shall be located so that food, equipment, linens, and single-service and single-use articles are protected from contamination. ***Multiple personal food items were being stored in the reach-in cooler above food for the restaurant. |