|
39
|
1
|
Contamination prevented during food preparation, storage & display |
No |
No
|
No |
3-305.11 Food Storage - Preventing Contamination from the Premises (C)
Both HVAC compressors in the market observed with condensation dripping from the unit. Condensation was leaking inside the meat grinder where the grinder had to be relocated. Repair and prevent contamination from the premises. Work order initiated by the manager. Will do an intent to suspend if not repaired. |
|
45
|
0.50
|
Single-use & single-service articles: properly stored & used |
No |
No
|
No |
Store Styrofoam trays in a manner to protect against contamination. Styrofoam trays found stored on dirty shelf racks along the walls. Styrofoam Trays found on the racks along the walls that need to be cleaned. Racks found with build-up. Trays are to be removed and racks cleaned. Do not store single service trays on dirty racks, lines or surfaces including the floors. Store in a clean location.
4-903.11 (A) and (C) Equipment, Utensils, Linens and Single-Service and Single-Use Articles - Storing (C) |
|
47
|
1
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Good Repair and Proper Adjustment - Equipment (C)
Replace rusty attachments on pipes and lines along the walls. Cold case racks in the cases are rusting. Replace caulking along the door edges of the walk incooler and freezer. Repair torn/loose door gasket on the freezer door. Service the walk in freezer due to large amounts of ice build-up inside and along the doors. Shopping carts are not to be used for storage. Replace worn cutting boards or smooth the surfaces where each can be cleaned completely. Equipment is to be in good repair. Work order placed per management.
4-501.12 Cutting Surfaces (C) |
|
49
|
0.50
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11 (B) and (C) Equipment, Food-Contact Surfaces, Nonfood Contact Surfaces, and Utensils (C)
4-602.13 Nonfood Contact Surfaces (C)
Clean the racks where single serve trays are stored. Clean the rolling racksalong the trail lines, the racks inside the walk in cooler and cutting room racks along the trails on each rack. Clean along the walk in cooler door lines. Clean the wrapper station Clean the walk in cooler shelves and racks. Equipment and surfaces are to be clean. |
|
55
|
1
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
Will issue an intent to suspend if not repaired. Repair the entry door areas of each walk-in-cooler entrance, threshold and wall areas. Loose frp and peeling lines observed. Replace ceiling tile along the isle meat cases observed peeling. Remove microbial growth from frp seams and areas around the old window/ unused walk incooler door as well as the walk in cooler and freezer entrance areas. Repair loose and broken wall base border trim and frp panels. Microbial growth found along the walk-in-cooler entrances and along multiple frp seals and trim lines. Repair frp along the walls and borders. Clean frp with rust runoff lines. Damaged trim on walls and lower frp found loose and in need of reapir. FRP detached from walls. Grout receded between floor tiles. Re-grout where needed. Cracked base tiles found in the cutting room. Grout missing along wall juncture. Re-grout the floor tiles where worn. Walk incooler base border tiles found loose as well as floor panels. Clean the condessor coils in the meat market and repair the condensation leak from the pipe line of the condenssor. Clean the floors inside the walk in coooler along the walls and floor junctures in cooler. Clean and recoat the floors in the restroom. Clean the light fixtures and ceiling lines. Replace rusty light balances. Floors, walls and ceiling are to be clean and in good repair.
6-501.11 Repairing-Premises, Structures, Attachments, and Fixtures-Methods - C
6-501.12 Cleaning, Frequency and Restrictions - C |