|
1
|
1
|
PIC Present, demonstrates knowledge, & performs duties |
No |
Yes
|
No |
2-103.11 The PIC shall ensure rules in the code for food safety and handling are met. Foodborne illness risk factor violations today. |
|
10
|
1
|
Handwashing sinks supplied & accessible |
Yes |
Yes
|
No |
5-203.11 A least one hand sink must be provided for employee handwashing. Water should be kept on for handwashing. Water turned on during inspection. |
|
22
|
1.50
|
Proper cold holding temperatures |
No |
Yes
|
Yes |
3-501.16 Maintain TCS foods in cold holding at 41F or less. Upright unit and prep unit are unable to maintain food temperatures at 41F or less. Food temperatures are 43F to 46F. A verification visit will be made to ensure this is corrected. Asada was 48F in upright and was voluntarily discarded. |
|
23
|
0
|
Proper date marking & disposition |
Yes |
No
|
No |
3-501.17 Ready-To-Eat Time / Temperature Control for Safety Food, Date Marking (Pf) Use a 4 date marking system. Several foods including chicken cooked, pastor, asada cooked on 6/1 needs to be used today or discarded. Using 4 day date marking system as corrective action. |
|
38
|
1
|
Insects & rodents not present; no unauthorized animals |
No |
No
|
No |
6-202.15 Outer Openings, Protected (C)
6-202.15 Protect outer openings of establishment from insect or rodent entry. Screen on screen door needs repair. |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
Yes |
4-501.11 Equipment shall be maintained in good repair. Upright refrigeration unit and prep unit are unable to maintain food temperatures at 41F or less. Ambient air was 41F. Have units serviced. A verification visit will be made on 6/5/26 Friday to ensure operating properly and able to maintain food temperatures at 41F or less. If unable to maintain food temperatures at 41F or less, permit action will be taken. |
|
48
|
0.50
|
Warewashing facilities: installed, maintained & used; test strips |
No |
No
|
No |
4-501.14 Warewashing machine and sink compartments shall be cleaned before use throughout the day at a frequency necessary to prevent recontamination of equipment and utensils or at least every 24 hours. Clean Warewashing sink. |