|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|
2
|
1
|
Certified Food Protection Manager |
Yes |
Yes
|
No |
2-102.12 (A); The food employee present did not have food protection manager certification. A certified food protection manager was not present during inspection. A person in charge shall be a certified food protection manager who has shown proficiency of required information through passing a test that is part of an accredited program. Acquire a food protection manager certification. List of ANSI-approved programs: https://anabpd.ansi.org/Accreditation/credentialing/personnel-certification/food-protection-manager/ALLdirectoryListing?menuID=8&prgID=8&statusID=4 |
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-703.11 After cleaning, equipment, food contact surfaces, and utensils shall be sanitized using an approved method (P) Employee was observed washing equipment with a soapy brush but not rinsing or sanitizing. Equipment shall be washed, rinsed, and sanitized. CDI: REHS walked PIC and employee through steps of washing, rinsing, and sanitizing equipment. Sink was filled with sanitizer and soapy water and demonstration was performed. Equipment was recleaned properly. |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-501.12 Resurface or replace cutting surfaces that can no longer be effectively cleaned and sanitized. Cutting boards were heavily scored. Resurface or replace cutting boards.
4-101.17 Wood, Use Limitation (C) Facility is using a wooden cutting board (PIC uncertain if hard maple). Wood and wood wicker may not be used as a food-contact surface. (Exceptions for hard maple as cutting board, storage of shelled and raw fruits/veggies). Remove cutting boards. |
|
48
|
0
|
Warewashing facilities: installed, maintained & used; test strips |
Yes |
No
|
No |
4-603.16 Washed utensils and equipment shall be rinsed prior to sanitizing. Employee was observed washing equipment with soapy brush but not rinsing or sanitizing. CDI: REHS walked PIC and employee through steps of washing, rinsing, and sanitizing. Sink was filled with sanitizer and soapy water and demonstration was performed. Equipment was properly cleaned. |
|
49
|
0
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11 (B) and (C) Equipment, Food-Contact Surfaces, Nonfood Contact Surfaces, and Utensils (C) Walk-in cooler door handle had accumulations of food debris.Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. Clean areas listed. |
|