Premises Information


	Return to Inspections

Name

JUNCTION 49 - POOL

Address

7521 TWITTER LN

City/State/ZIP

CHARLOTTE

28213

Premise Type

53 - Year-Round Swimming Pool

County

Mecklenburg

Inspection Date

10/29/2026

Final Score @ Grade

General Comments

- Operator has only just recently taken over as of 10/20/26 and the previous operator kept an electronic record log that became inaccessible when the previous operator was fired. New logs only begin from 10/20/26 onwards. New operator was advised to ensure logs can be accessed in the event of them not being on site. - Pool rules signage (x4) all stated that the pool hours of operation were 9am-8pm despite the pool not being approved for night swimming. Operator corrected the signs to stated 9am-Dusk as the pool hours. - Phone operation system was chnaged over to a Kings III system since the last inspection. - Required flow meter reading is between 110-138pgm or the pump must be set to 3450rpm.

Violations

CDI=Corrected During Inspection

R=Repeat Violation

VR=Verification Required

Violation Item	Demerits	Violation Description	CDI	R	VR	Comments
5	4	Water quality: daily written records of water quality and test kit kept on site	No	No	No	.2535(11) Provide record keeping including daily records of disinfectant residual, pH, drain cover/grate inspections, pool water maintenance, and temperature, if applicable. - Observed the current records to not include a main drain check. CDI - Operator added a main drain check to the daily record sheet.
22	6	Premises: emergency telephone provided	No	No	No	.2530(f) Signage with legible letters providing dialing instructions, address of pool and pool telephone number shall be posted at the emergency phone. - Observed the sign posted at the emergency phone to not be provided with a callback number. CDI - Operator printed out phone number label and posted at the emergency phone sign.
24	4	Equipment room: approved pump, filter, and flow meter operating properly	No	No	No	.2518(g) Keep the flow meter operational. - Observed the flow meter to not be functional at the time of the inspection with the bobber reading 0ppm and being stuck at the bottom. CDI - Flow meter repaired at the time of the inspection and flow observed at 125gpm.