| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
No |
Yes
|
No |
4-702.11 Before Use After Cleaning - P -- Observed stacks of metal containers overstacked in the sani basin, not being submerged into the sanitizer solution. Employees shall properly wash, rinse, and sanitize dishes before placing in clean storage. The containers shall be submerged for a minimum of 30 seconds in the Quat solution. The violation was corrected with education and sanitizing of the dishes.
4-602.11 Equipment Food-Contact Surfaces and Utensils-Frequency - C -- Observed mold growth inside drink dispenser nozzles and chute. Follow manufacturer’s instructions to clean and sanitize at a frequency to preclude the accumulation of soil and mold. |
|
21
|
1.50
|
Proper hot holding temperatures |
Yes |
No
|
No |
3-501.16 (A)(1) Time/Temperature Control for Safety Food, Hot and Cold Holding - P -- Observed a container of meatballs in the drive thru warmer stored between 118-127°F for less than 2 hours on the steam table. Store TCS foods at 135°F or above when hot holding. The meatballs were reheated above 165°F to correct the violation. |
|
28
|
0
|
Toxic substances properly identified stored & used |
Yes |
No
|
No |
7-102.11 Common Name-Working Containers - Pf -- Observed one chemical bottle that was not labeled. Working containers used for storing poisonous or toxic materials such as cleaners and sanitizers taken from bulk supplies shall be clearly and individually identified with the common name of the material. The bottle was labeled to correct the violation. |
|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Cooling Methods - Pf -- Observed recently cut tomatoes cooling in the top of the sandwich to-go prep and main unit. The top of a sandwich prep unit is intended to maintain proper food temperatures, not cool food. When food is placed in cooling or cold holding equipment, food containers in which food is being cooled shall be arranged in the equipment to provide maximum heat transfer through the container walls; and loosely covered, or uncovered if protected from overhead contamination during the cooling period to facilitate heat transfer from the surface of the food. The items were placed inside the walk-in cooler to correct the violation. |
|
44
|
0
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
Yes
|
No |
4-903.11 (A), (B) and (D) Equipment, Utensils, Linens and Single-Service and Single-Use Articles-Storing - C -- Observed clean lids at the drive thru stored in dirty, uncovered containers on the wall mount. Cleaned equipment and utensils shall be stored in a clean, dry location where they are not exposed to splash, dust, or other contamination; at least 6 inches above the floor; in a self-draining position that allows air-drying; and covered or inverted. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-501.11 Good Repair and Proper Adjustment-Equipment - C -- Repair and seal the walk-in cooler floor at the seams to make it flush and easy cleanable. Re-paint, coat or replace shelving throughout stock rooms and in unit where rust is present. Sand and paint the bottom and legs of the stainless prep table in the kitchen where rust is present. Equipment shall be maintained in good repair and components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. |
|
49
|
0.50
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11 (B) and (C) Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils - C -- Observed dust, build-up and crumbs on tops of equipment, shelving, heating cabinets, microwave, bread racks, and inside refrigeration. Heavy cleaning needed on shelving inside walk-in cooler, speed racks and freezer. Clean gaskets on equipment where mold is present. Nonfood contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. |
|
53
|
0.50
|
Toilet facilities: properly constructed, supplied & cleaned |
No |
Yes
|
No |
6-501.18 Cleaning of Plumbing Fixtures - C -- Toilet and urinal in the men's restroom needs to be cleaned. Plumbing fixtures such as handwashing sinks, toilets, and urinals shall be cleaned as often as necessary to keep them clean. |
|
55
|
0.50
|
Physical facilities installed, maintained & clean |
No |
Yes
|
No |
6-501.12 Cleaning, Frequency and Restrictions - C -- Clean floors and walls under/behind equipment, walk-in cooler and baseboards. Special attention to the walls behind the prep sink and counter. Clean under shelving in walk-ins. Physical facilities shall be cleaned as often as necessary to keep them clean. |