|
2
|
1
|
Certified Food Protection Manager |
No |
Yes
|
No |
2-102.12 (A) PIC shall demonstrate knowledge by being a certified food protection manager. Observed no CFPM onsite during inspection. *REPEAT*
For more information on becoming a certified food protection manager please visit: www.mecknc.gov/foodsafety |
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf. Observed deli slicer near pizza flip top with heavy food debris and residue accumulation. PIC stated it was last used the night before. CDI- EHS discussed cleaning procedures with PIC, PIC removed item to be w/r/s.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
23
|
3
|
Proper date marking & disposition |
Yes |
Yes
|
No |
3-501.17 Date mark/label all TCS foods that are ready-to-eat once opened or prepared and held more than 24hrs. -Pf. Observed penne noodles held in 2D prep unit without a date and opened package of ham without a date after 24hrs. CDI- PIC was aware of when penne noodles were cooked and applied correct date marks to both items. *REPEAT*
For more information, please visit: www.mecknc.gov/foodsafety or view our training videos at the following weblinks: What are TCS Foods https://www.youtube.com/watch?v=q0iLZb7v0UM and Date Marking Food Safely https://youtu.be/BOPsSNUajYs .
3-501.18 Discard the food requiring date labels once time/temperature window has expired, if it is not been labeled, or if the label is incorrect. -P. Observed spaghetti and penne noodles cooked and prepped on 6/19, cooked bolognese dated 5/28, and diced chicken held in WIC dated incorrectly. CDI- PIC voluntarily discarded items. *REPEAT*
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Date Marking Food Safely https://youtu.be/BOPsSNUajYs . |
|
33
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf. Observed Italian sausage and diced mozzarella temping above 41F, cooling at a rate of .05F/min in flip top unit. PIC stated that items were prepped this morning after being removed from WIC and that the expectation was for items to cool in unit. CDI- EHS discussed effective cooling methods, PIC removed items rapidly cool in standing RIF.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
35
|
0
|
Approved thawing methods used |
Yes |
No
|
No |
3-501.13 (A), (B) Use approved thawing methods. Pf. Observed Italian sausage being thawed on prep counter. Observed raw ground meat thawing in submerged running water temping above 100F. CDI- EHS discussed approved thawing methods, PIC removed Italian sausage to WIC and turned the cold running water on after draining the hot water from prep sink basin. |
|
49
|
0
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed gaskets of 2D prep units with food debris and residue accumulation, bottom of units with aged food debris accumulation. |
|
51
|
1
|
Plumbing installed; proper backflow devices |
No |
No
|
No |
5-205.15 Maintain a plumbing system in good repair. Observed front handsink hot water nozzle not functioning properly prior to EHS adjusting it, PIC stated it needed to be repaired. Observed back handsink hot and cold water not working properly due to need repairs to nozzles. PIC stated that back handsink has not been in use. |