|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11 (A) Equipment, Food-Contact Surfaces, Nonfood Contact Surfaces, and Utensils (Pf);
Brown plastic lexane pans had food fragments on them. Food contact surfaces shall be clean to the sight and touch.
CDI: Pans were re-washed. |
|
22
|
1.50
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16 (A) (2) and (B) Time / Temperature Control for Safety Food, Hot and Cold Holding (P)
The salads, open bag of lettuce and sliced cheese at the bottom of the prep. cooler were above 41F.TPHC foods shall be cold held at 41F or below.
CDI: It was discovered that the bottom of the prep. cooler power switch was turned off. It actually had an ambient temperature of 32F once it was turned on and had time to cool. Per the PIC, the salads and the open bag of lettuce were inside the unit for nearly 7 hours therefore, those items were discarded. Per the PIC, the shredded cheese had been inside the bottom of the prep unit for less than 2 hours ; therefore, the cheese was re-located to the walk-in cooler. |
|
44
|
0.50
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
Yes
|
No |
4-903.11 (A), (B), and (D) Equipment, Utensils, Linens and Single-Service and Single-Use Articles Storing (C)
The plastic lexane pans and metal pans were stacked wet. Utensils shall be allowed to air-dry before storing and/or stacking. |
|
48
|
0.50
|
Warewashing facilities: installed, maintained & used; test strips |
No |
No
|
Yes |
4-302.13 Temperature Measuring Devices, Manual Warewashing (Pf)
There was no temperature measuring device for the hot water sanitizing dishmachine. For hot water mechanical dishwashers, an irreversible registering temperature indicator shall be provided and readily accessible for measuring the utensil surface temperature.
I will return with ten(10) days to ensure there is a temperature measuring device available. |
|
49
|
0.50
|
Non-food contact surfaces clean |
No |
No
|
No |
4-602.13 Nonfood Contact Surfaces (C)
Due to build up of dust, grease and accumulation of soil, the following equipment needs to be cleaned: legs of biscuit table; the French fry freezer exterior and gasket; ; black mobile cart; shelves at the two stainless steel tables located next to the FWE warming cabinet; faucet and sprayer handles at the 3-compartment sink; cabinet underneath the lobby drink station and any other equipment as needed.
Non food contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil residues. |
|
55
|
0.50
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.12 Cleaning, Frequency and Restrictions (C)
Hood vents need cleaning. Floor needs cleaning at the following: left side of biscuit prep. cooler; right side of ovens; underneath the fryers; near the back door and anywhere else as needed. Ceiling vents in dining room and restroom need cleaning. Replace any water damaged ceiling tiles. |
|