|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-703.11(B) After being cleaned in a mechanical dish machine, equipment food-contact surfaces and utensils shall be sanitized in the dish machine by achieving a utensil surface temperature of 160F as measured by a max/min thermometer.-P. Observed dish machine unable to reach 160F. PIC stated manufacturer instructed establishment to calibrate via area behind front panel below door. Establishment does not use multiuse eating equipment or utensils, but uses dish machine for bar glasses. CDI- Establishment to complete wash and rinse step with dish machine and sanitize with quat solution. EHS will follow up with establishment.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training video at the following weblink: Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
36
|
0.50
|
Thermometers provided & accurate |
No |
No
|
Yes |
4-502.11(B) Provide accurately calibrated thermometers. Pf. Observed establishment without food thermometer. VERIFICATION REQUIRED on or before 7/10.
For information on how to properly calibrate a thermometer please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training video at the following weblink: https://youtu.be/IxXix712KkI |
|
49
|
0
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed handles of cold holding equipment needing to be cleaned. |