|
2
|
1
|
Certified Food Protection Manager |
No |
Yes
|
No |
2-102.12 (A) PIC shall demonstrate knowledge by being a certified food protection manager. Only employee with active ANSI food protection manager certification arrived at end of inspection. PIC with active ANSI food protection manager certification must be present during all hours of operation. REPEAT
For more information on becoming a certified food protection manager please visit: www.mecknc.gov/foodsafety |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Shelf rusting in reach-in cooler. Also, screen tray for baking is damaged and needs to be replaced. 0 pts. |
|
49
|
0.50
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Clean top of reach-in freezer and toaster oven. |
|
55
|
0.50
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure. Dust buildup on wall beside oven. Buildup on wall behind 3-compartment sink. |