|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-501.114 Maintain sanitizer at correct concentrations when being used to sanitize. -P Observed sanitizer maintaining concentration of 10ppm chlorine during inspection. CDI - PIC was able to fix machine to dispense sanitizer at proper concentrations.
For more information please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg and How to Test Sanitizer https://youtu.be/y0SjmnabFaY |
|
20
|
1.50
|
Proper cooling time & temperatures |
Yes |
Yes
|
No |
3-501.14(B) Quickly cool TCS foods that are prepared from room temperature ingredients. Food must be to 41F within 4 hours. -P. Observed house made dressings with oil and raw garlic cooling at 0F/minute during inspection. CDI - PIC changed cooling methods, both dressing achieved proper cooling parameters during inspection. Repeat. Points not escalated due to evident improvement.
For more information, please visit: www.meckncgov/foodsafety or view our training videos at the following weblinks: What are TCS Foods https://www.youtube.com/watch?v=q0iLZb7v0UM and Cooling Food Safely https://www.youtube.com/watch?v=P6x8b1ZVOxU . |
|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
Yes
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf Observed container of Greek dressing being cooled in deep container in WIC. Dressing was cooling below proper time/temperature parameters. CDI - PIC moved dressings to smaller containers or to reach in freezer to cool. Repeat.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.12 Resurface or replace cutting surfaces that can no longer be effectively cleaned and sanitized. Observed all cutting boards in facility with deep grooves in cutting surface. Replacement or resurfacing needed. |
|
49
|
0
|
Non-food contact surfaces clean |
Yes |
No
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed mold build up on exterior corners of dish machine during inspection. CDI - Employee cleaned dish machine. |