|
5
|
0.50
|
Procedures for responding to vomiting & diarrheal events |
Yes |
Yes
|
No |
2-501.11 A food establishment shall have written procedures for employees to follow when responding to vomiting or diarrheal events. -Pf
For more information please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation
Establishment could not provide written vomit and diarrheal event clean-up procedures.
CDI - EHS provided PIC with written procedures. - 0.5 - REPEAT |
|
10
|
0
|
Handwashing sinks supplied & accessible |
Yes |
No
|
No |
5-205.11 (A) A handwashing sink shall be maintained so that it is accessible at all times for employee use Pf.
Observed trash cans blocking three handwashing sinks in the kitchen area. CDI - PIC moved trash cans to allow for easy access to sinks. |
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
No |
No
|
No |
4-703.11(B) After being cleaned in a mechanical dish machine, equipment food-contact surfaces and utensils shall be sanitized in the dish machine by achieving a utensil surface temperature of 160F as measured by a max/min thermometer.-P.
Observed final rinse temperature of mechanical dish machine, measured by a plate thermometer, at 155F. A VR will be conducted within three days to verify rinse temperature can reach 160F minimum. Three compartment sink must be used for sanitizing until dish machine is adjusted. - 1.5 -
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training video at the following weblink: Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
44
|
0.50
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
Yes
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing.
Observed pans stacked wet. - 0.5 - REPEAT |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
Yes |
No
|
No |
4-502.11(A) Maintain utensils in good repair.
Observed metal mesh strainer in clean utensil storage with damage to edge. Mesh was fraying. CDI - PIC discarded utensil. |
|
48
|
0.50
|
Warewashing facilities: installed, maintained & used; test strips |
No |
No
|
No |
4-302.13 (B) Provide an approved Max/Min thermometer for testing sanitizing temperatures in hot water warewashing machines. The thermometer must be readily accessible. -Pf
Observed facility does not yet have max temperature registering device for high temp dish machine. EHS provided more info for obtaining approved devices including temperature indicating strips. A VR will be conducted within 10 days to verify possession of max/min thermometer or test strips. - 0.5 - |