|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf. Observed shredded lettuce cooling since 9:00 AM at 71F in RI with plastic lid cover. CDI-PIC voluntarily discarded item. EHS spoke with PIC about using WIC instead of a RI to cool since the RIs are opened and used more consistently during service and to uncover prepped foods as well.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-202.11 Multiuse food contact surfaces shall be smooth, free of open seams, cracks, chips, pits, sharp internal angles, crevices and assembled to allow access to clean. -Pf. Observed several plastic containers with chips and cracks on the inside, food contact surface portion of containers. CDI-PIC to order new containers and discard cracked ones. |
|
49
|
0
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed vents above the grill area with moderate grease buildup and moderate rusted shelving in WIC. Repeat, but no escalation of points due to improvement of hot drawer cleanliness. |