|
7
|
4
|
Pool maintenance: pool walls and floor kept clean, free of debris and in good repair |
No |
No
|
No |
Leaves and debris on pool floor. .2537(14) Keep pool surface and pool floor free of debris. - Intent to suspend item. |
|
8
|
4
|
Pool maintenance: surface skimmers (with weirs, baskets and covers) or gutters clean, in good repair, and functioning properly, no floating debris |
No |
No
|
No |
All three weirs missing. .2518(k) Replace missing weirs. - Corrected.
Skimmers full of debris. .2518(k) Keep skimmers free of debris so skimmers are capable of operating per manufacturer instruction. - Corrected. |
|
11
|
2
|
Pool maintenance: diving equipment, ladders, steps and handrails properly placed, in good repair |
No |
No
|
No |
Both escutcheon plates missing on one handrail. .2521 Install handrails per manufacturer instructions. |
|
15
|
6
|
Premises: body hook and ring buoy with throw rope or lifeguard with rescue tube provided and properly located |
No |
No
|
No |
Body hook not securely attached to pole, just held by plastic clip. .2530(a) Provide at least 12 ft. long pole with body hook securely attached. - Corrected. |
|
16
|
4
|
Premises: fence or barrier with self-closing, self-latching gates properly constructed and maintained |
No |
No
|
No |
Some pickets bent, openings > 4 inches through the fence. .2528(a) Provide no openings in fence and/or gate greater than 4"x4". - Intent to suspend item. |
|
17
|
4
|
Premises: decks unobstructed, properly drained, free of trip hazards |
No |
No
|
No |
Most chairs too close to the pool. .2522(a) Provide 6 ft of clear walking space around the pool at all times. - Corrected. |
|
18
|
4
|
Premises: lifeguards present or warning signs posted |
No |
No
|
No |
Warning - No Lifeguard on Duty signs in less than 4” lettering. .2530(c) Provide "Warning - No Lifeguard on Duty" in 4" lettering. - Intent to suspend item. |
|
24
|
4
|
Equipment room: approved pump, filter, and flow meter operating properly |
No |
No
|
No |
Bobber on flow meter installed upside down. .2518(g) Install flow meter on return line per manufacturer instructions. - Intent to suspend item. |