| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|
3
|
1
|
Management, food & conditional employee; knowledge, responsibilities & reporting |
Yes |
No
|
No |
2-103.11 - Person In Charge: Ensure food employees are informed of their responsibility to report required symptoms, illnesses and exposure. Pf
There is currently no Employee Health Agreement hanging on the wall. CDI-EHS provided a copy to PIC. |
|
20
|
0
|
Proper cooling time & temperatures |
Yes |
No
|
No |
3-501.14 Cooling (P) Observed pasta in WIC cooling. 1st temp 62 F taken at 11:17am. 2nd temp 44 F taken at 12pm. PIC stated pasta was prepared at 9am. Still within 6 hour time frame to cool to 41 F. PIC placed pasta in the WIF uncovered to assist with cooling. NO POINTS TAKEN DURING THIS INSPECTION. |
|
23
|
1.50
|
Proper date marking & disposition |
Yes |
No
|
No |
3-501.17 - Ready-to-Eat, Potentially Hazardous Food (Time/Temperature Control for Safety Food), Date Marking: Date mark all TCS foods that are ready-to-eat once opened or prepared and held more than 24hrs. Pf Observed several items in prep unit with no date marking (i.e mozzarella cheese, pepperoni, turkey, ham). Observed pasta in lowboy with no date mark. CDI-PIC placed date marking. Once opened or prepared place a date mark. |
|
28
|
1
|
Toxic substances properly identified stored & used |
Yes |
No
|
No |
7-204.11 - Sanitizers, Criteria: Chemical sanitizers used on food contact surfaces shall not exceed stated concentrations (100 ppm for chlorine and 400 ppm for quaternary ammonia). P Observed chlorine sanitizer too high. CDI-PIC remade chlorine sanitizer to correct concentration. |
|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 - Cooling Methods: Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. Pf Observed pasta in a large container cooling. CDI-PIC placed pasta in WIF to quickly cool. EHS recommends to separate pasta into shallow pans to allow air flow to quickly cool product. |
|
37
|
0
|
Food properly labeled: original container |
No |
No
|
No |
3-302.12 - Food Storage Containers, Identified with Common Name of Food: Label all working containers of food (oils, spices, salts) except food that is easy to identify such as dry pasta. Observed two bottles on stove with no label. Label bottles if not in original container to easily identify. |
|
44
|
0
|
Utensils, equipment & linens: properly stored, dried & handled |
Yes |
No
|
No |
4-904.13 - Preset Tableware: Tableware that is preset shall be protected from contamination by being wrapped, covered, inverted or removed. Observed plastic red baskets used for food upright. CDI- PIC inverted plates. Be sure to invert tableware to protect from contamination. |
|
47
|
1
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-501.11 - Good Repair and Proper Adjustment: Equipment components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted. Observed gasket in WIF toward the bottom torn. Observed inside of the prep unit used to store toppings is broken. REPAIR OR REPLACE. REPEAT. |
|
49
|
0.50
|
Non-food contact surfaces clean |
No |
No
|
No |
4-602.13 - Equipment, Food-Contact Surfaces, Nonfood-Contact Surfaces, and Utensils: Non-food contact surfaces of equipment shall be cleaned at frequency to prevent accumulation of soil residue. Observed RIF bottom with debris accumulation. Observed racks in lowboy with slight rusting and debris on bottom. KEEP CLEAN. |
|
55
|
1
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.113 - Storing Maintenance Tools: Maintenance tools such as brooms, mops, vacuum cleaners, and similar items shall be stored so they do not contaminate food, equipment, utensils, linens, and single-service and single-use articles. Observed screw driver on shelf with condiments. Observed two rolls of duck tape on shelf with condiments. Store maintenance tools away from food to prevent from contamination.
6-501.11/12 - Cleaning, Frequency and Restrictions: All physical facilities shall be maintained in good repair and shall be cleaned as often as necessary to keep them clean and by methods that prevent contamination of food products. Clean floors, and around equipment to remove food and grease accumulation. REPEAT. |
|
56
|
1
|
Meets ventilation & lighting requirements; designated areas used |
No |
No
|
No |
6-501.14 - Cleaning Ventilation Systems, Nuisance and Discharge Prohibition: Change the filters and clean the intake and exhaust air ducts so they are not a source of contamination by dust, dirt or other materials. Observed ventilation systems with dust accumulation. Clean.
6-202.11 - Light Bulbs, Protective Shielding: Light bulbs shall be shielded, coated, or otherwise shatter-resistant in areas where there is exposed food; clean equipment, utensils, and linens; or unwrapped single-service and single-use articles. Observed two light shields in the kitchen area cracked. Replace with shatter resistant.
6-403.11 - Designated Areas: Areas designated for employees to eat, drink, and use tobacco shall be located so that food, equipment, linens, and single-service and single-use articles are protected from contamination. Observed a vape on shelf with drink pitchers. Observed phone on shelf with single use articles. Observed a red bull can on shelf in the clean dish area. Designated an area for employee personal items.
6-303.11 Intensity - Lighting (C) Observed all lights on hood are out. REPLACE. A food area is required to have 50 fc. |