|
2
|
1
|
Certified Food Protection Manager |
No |
Yes
|
No |
2-102.12 (A) PIC shall demonstrate knowledge by being a certified food protection manager. No CFPM available at time of inspection. Repeat.
For more information on becoming a certified food protection manager please visit: www.mecknc.gov/foodsafety |
|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
No |
No
|
No |
4-602.11 (C ) Equipment food contact surfaces and utensils shall be cleaned, and sanitized per 4-702.11/4-703.11, throughout the day at least every 4 hours, unless otherwise indicated in the Food Code, P. Onion chopper on wall cleaned once per day. If used more than once per day, clean onion chopper at least every 4 hours. No points deducted.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
23
|
1.50
|
Proper date marking & disposition |
Yes |
No
|
No |
3-501.17 (A) or (B) Date mark/label all TCS foods that are ready-to-eat once opened or prepared and are to be held for more than 24 hours. Pre-cooked lamb gyro meat, opened container of meat, and 2 bags of cut lettuce lacked date marks. Date marks added.
For more information, please visit: www.mecknc.gov/foodsafety or view our training videos at the following weblinks: What are TCS Foods https://www.youtube.com/watch?v=q0iLZb7v0UM and Date Marking Food Safely https://youtu.be/BOPsSNUajYs . |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.12 Resurface or replace cutting surfaces that can no longer be effectively cleaned and sanitized. Replace/repair cutting board at prep top if deep cuts in board cannot be properly sanitized. No points deducted. |
|
49
|
1
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris. 4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. - Observed shelving and interiors and exteriors of equipment in need of cleaning. Clean and increase cleaning frequency. Repeat. |
|
55
|
1
|
Physical facilities installed, maintained & clean |
No |
Yes
|
No |
6-501.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure. Observed floors, walls, ceiling and vents with large amount of dust and grease buildup. Clean more frequently to maintain compliance. Repeat. |