|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf. - Observed the blade to the table mounted can opener to have an accumulation of food debris/black grime on its surface.
CDI - PIC placed at dishpit to be W/R/S.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
22
|
1.50
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P - Observed 2 containers of raw chicken sitting out on the prep table at temperatures of 44-46F. No active prep was observed. PIC stated that an employee had taken it out to prep and then went on break. EHS advised to not remove TCS products from temperature control until they are ready to work with them.
CDI - PIC placed back into WIC to rapidly cool back down.
For more information, please visit: www.mecknc.gov/foodsafety or view our training videos at the following weblinks: What are TCS Foods https://www.youtube.com/watch?v=q0iLZb7v0UM and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ . |
|
41
|
0
|
Wiping cloths: properly used & stored |
Yes |
No
|
No |
3-304.14(B) Hold in-use wiping cloths in properly concentrated sanitizer between uses. - Observed both cookline wiping cloth bucket solutions to be testing at <50ppm quaternary ammonia.
CDI - PIC changed solutions as they were from a few hours prior. Retested at 150-200ppm. |
|
51
|
0
|
Plumbing installed; proper backflow devices |
No |
No
|
No |
5-205.15 Maintain a plumbing system in good repair. - Observed the cold water handle to the cookline handwash sink to be broken in that it does not turn on the water and just continuously spins. |