|
10
|
1
|
Handwashing sinks supplied & accessible |
Yes |
No
|
No |
5-205.11 (B) A handwashing sink may not be used for purposes other than handwashing Pf. - Observed PIC and employee filling up containers of water for hot holding equipment from the hand sink. CDI- Education was provided and EHS observed proper use of hand sinks during the inspection. |
|
22
|
1.50
|
Proper cold holding temperatures |
No |
No
|
Yes |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ. - Observed prep unit at 60F. Observed all TCS foods in unit above 41F, see temp chart. PIC stated all items were cold held at 41F and below from the commissary. PIC was able to place items on a 4hr TPHC, EHS provided PIC with TPHC form. Items to be discarded by 3 PM. A VR will occur within 3 days to ensure equipment is maintaining TCS foods at 41F or below. EHS re educated PIC that all cold holding equipment must be maintained during transit. MFU has another reach in cooler functioning at 38F during the inspection. |
|
36
|
0.50
|
Thermometers provided & accurate |
No |
No
|
Yes |
4-302.12 Provide an accessible thermometer for use. Provide a thin probe thermometer for accurate measure of thin foods.-Pf . For information on how to properly calibrate a thermometer please visit: http://meck.co/FoodSafety or view our training video at the following weblink: https://youtu.be/IxXix712KkI. - Observed no thin probe thermometer available during the inspection. A VR will occur within 10 days to ensure a thin probe thermometer is provided when MFU is in operation. |
|
38
|
0
|
Insects & rodents not present; no unauthorized animals |
No |
No
|
No |
6-202.15 Protect outer openings of establishment from insect or rodent entry. - Observed front door windows of MFU open without protection from out door pest. |
|
43
|
0
|
In-use utensils: properly stored |
Yes |
No
|
No |
3-304.12 (F) Containers of water used for storing in-use utensils must be maintained at a temperature of at least 135 F and cleaned at least every 24 hours or when container has accumulated soil or residue.- Observed in use utensils in water at 113F. CDI- PIC provided water at least 135F. |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. - Observed prep cold holding unit functioning at 60F.
4-501.12 Resurface or replace cutting surfaces that can no longer be effectively cleaned and sanitized. - Observed prep top cutting board in need of resurfacing or replacing due to deep cuts and grooves.
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance. - Observed absorbent bungee cords being used near food prep areas and on hot holding/cooking equipment. |