|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf. Observed one (1) press slicer stored as clean at dish storage with minor food debris in slicer blades. Per conversation with PIC, slicer is not utilized by facility and may be a holdover piece of equipment from previous ownership.
CDI - EHS rotated slicer to 3 compartment sink for corrective cleaning by warewashing staff. All equipment and utensils stored as clean are to be clean to sight and touch. If equipment unneeded, damaged, or difficult to clean and sanitize, EHS advises disposing of this equipment.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance. EHS observed minor corrosion on right side shelving of WIC. Paint, resurface, or replace corroded surfaces such that they are smooth and easily cleanable. |
|
55
|
0.50
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.12 Floors, walls, ceilings including the attachments such as soap, towel dispensers; light fixtures; and heat/ac vent covers shall be clean. Caution should be used to minimize food exposure. Observed buildup of dust at ceiling tiles and vents at kitchen entrance and bar entrance. Clean vents and surrounding ceiling tiles as needed to prevent dust accumulation.
6-101.11/6-201.11 Floors, walls and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable. Floors shall be non-absorbent in areas subject to moisture. Observed one (1) loose ceiling tile adjacent to stove hood. Install ceiling tiles such that they are properly seated within ceiling. |