| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|---|
|
10
|
2
|
Handwashing sinks supplied & accessible |
Yes |
Yes
|
No |
5-205.11 (B) A handwashing sink may not be used for purposes other than handwashing -Pf- Observed a bucket of cilantro that was sitting in the hand sink in the cutting room. -CDI- PIC removed the bucket of cilantro from the hand sink.
6-301.12 Provide paper towels or approved alternative for hand drying at each handsink. -Pf- Observed no paper towels to dry hands present in the restroom of the facility. -CDI- PIC placed paper towels in the restrooms bathroom. |
|
22
|
0
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P- Observed both beef steak and pork tenders in the display case that was above 41F. -CDI- PIC placed raw meats above 41F into WIC to cool.
For more information, please visit: www.mecknc.gov/foodsafety or view our training videos at the following weblinks: What are TCS Foods https://www.youtube.com/watch?v=q0iLZb7v0UM and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ . |
|
23
|
1.50
|
Proper date marking & disposition |
Yes |
Yes
|
No |
3-501.17 (A) or (B) Date mark/label all TCS foods that are ready-to-eat once opened or prepared and are to be held for more than 24 hours. -Pf- Observed queso fresco (Sliced) in display case with no date marking along with multiple deli meat chubs opened with no date marking. -CDI- PIC was able to establish when cheeses were cut and when deli chubs were opened and able to date mark accordingly. One deli chub voluntarily discarded.
For more information, please visit: www.mecknc.gov/foodsafety or view our training videos at the following weblinks: What are TCS Foods https://www.youtube.com/watch?v=q0iLZb7v0UM and Date Marking Food Safely https://youtu.be/BOPsSNUajYs . |
|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf- Observed raw beef brisket and pork in display case at 54F the PIC stated that after all meat is prepped they cool in WIC, however this meat was cut in the morning and placed directly into the display case, and wrapped in plastic. -CDI- PIC unwrapped the meats that were cooling and placed into WIC.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
38
|
0
|
Insects & rodents not present; no unauthorized animals |
No |
No
|
No |
6-501.111 Keep the premises free of insects, rodents, and other pests. Observed multiple small flies present in the cutting room of the facility. EHS recommends increasing the frequency of pest control visits/treatments. |
|
44
|
0
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing. Observed wet stacked containers on clean dish shelving. |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-101.11 (A) - (E ) Food contact surfaces shall be (A) Safe P, (B) Durable, Corrosion-Resistant, (C ) sufficient in weight and thickness to withstand repeated washing (D) Smooth and easily cleanable, and (E) Resistant to damage. Observed heavily corroded wheel of the meat cutting machine and a corroded blade and wheel hanging in the cutting room of the facility.
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent
cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance. Observed cardboard being used on table underneath prep top where meat grinder and deli slicers were stationed. Must use non absorbent materials. |
|
49
|
0
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed exterior of containers with buildup of food. Clean more thoroughly during W/R/S process. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-101.11/6-201.11 Floors, walls and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable. Floors shall be non-absorbent in areas subject to moisture. Observed floors pitted and holes forming throughout the cutting room of the facility. Refinish or resurface floors. |
|
56
|
0
|
Meets ventilation & lighting requirements; designated areas used |
Yes |
No
|
No |
6-403.11 (A)Areas designated for employees to eat and drink, shall be located so that food, equipment, linens, single service/use items are protected from contamination. Observed employee food stored with patron food in RIC in front of the facility by display case. Observed employee water bottle stored on prep surface. -CDI- PIC moved food and water. |