|
16
|
3
|
Food-contact surfaces: cleaned & sanitized |
Yes |
Yes
|
No |
4-501.114 Maintain sanitizer at correct concentrations when being used to sanitize. -P
For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg and How to Test Sanitizer https://youtu.be/y0SjmnabFaY
Observed Quaternary ammonia sanitizer in 3 compartment sink at 50ppm. Per directions concentration should be 200-400ppm. CDI - Dish employee added more tablets. Upon recheck concentration was 400ppm. - 3 - REPEAT |
|
44
|
0
|
Utensils, equipment & linens: properly stored, dried & handled |
Yes |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing. -C Observed dishes wet nested in dish area. CDI - PIC separated dishes and allowed to further dry.
4-903.11 (A) Store cleaned equipment, utensils, linens in a clean, dry location; where they are not exposed to splash, dust, or other contamination; and at least 6 inches above the floor. Observed plates stored food contact surface facing up on servers stand. CDI - PIC inverted plates. |
|
48
|
0
|
Warewashing facilities: installed, maintained & used; test strips |
Yes |
No
|
No |
4-302.14 Provide a test kit that accurately measures sanitizer concentrations. -Pf
Observed no test strips to measure concentration of quaternary ammonia sanitizer in 3 compartment sink.
CDI - Owner purchased strips and provide by end of inspection. |