|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf. Observed debris on can opener blade.
4-602.11 (C ) Equipment food contact surfaces and utensils shall be cleaned, and sanitized per 4-702.11/4-703.11, throughout the day at least every 4 hours, unless otherwise indicated in the Food Code, P. In-use utensils at prep line exceeded 4 hours. CDI - PIC replaced utensils.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Observed rusted storage shelving above 3-comp sink. |
|
48
|
0
|
Warewashing facilities: installed, maintained & used; test strips |
Yes |
No
|
No |
4-302.13 (B) Provide an approved Max/Min thermometer for testing sanitizing temperatures in hot water warewashing machines. The thermometer must be readily accessible. -Pf. High temp disc thermometer had dead batteries. CDI - employee pick up batteries at the store and replaced dead batteries. |
|
51
|
0
|
Plumbing installed; proper backflow devices |
Yes |
No
|
No |
5-205.15 Maintain a plumbing system in good repair. Observed leak at prep sink.
5-202.13 An air gap between the water supply and flood level rim shall be at least twice the diameter of the water supply inlet and not less than 1 inch. -P. Observed 3-comp sink sprayer hanging less than 1 inch above flood rim. CDI - PIC hung up sprayer at an adequate height. |