|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-501.114 Maintain sanitizer at correct concentrations when being used to sanitize. -P Observed in-use sanitizer in 3-comp-sink measuring below 50PPM. CDI - PIC correct concentration of sanitizer which resulted in 150PPM sanitizer.
For more information please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg and How to Test Sanitizer https://youtu.be/y0SjmnabFaY |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
Yes |
No
|
No |
4-501.12 Resurface or replace cutting surfaces that can no longer be effectively cleaned and sanitized. Observed two cutting boards with deep scratch and score marks. CDI - PIC discarded items.
4-501.11 Maintain equipment in good repair. Observed not-use broken RIC near register, establishment was using it for beverages only. Establishments currently has adequate refrigeration. |
|
49
|
0
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed built up food debris on low boy door gaskets of prep unit. |
|
56
|
0
|
Meets ventilation & lighting requirements; designated areas used |
Yes |
No
|
No |
6-501.14 Change the filters and clean the intake and exhaust air ducts so they are not a source of contamination by dust, dirt or other materials. Observed heavy grease build up on hood filters. CDI - PIC stated company should be coming this month to clean |