|
8
|
0
|
Hands clean & properly washed |
Yes |
No
|
No |
2-301.14 (H) Wash hands before donning gloves to initiate a task that involves working with food.- P. Observed food employee fail to wash hands before donning gloves. CDI- PIC had food employee discard gloves, wash hands properly before replacing. |
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-501.114 Maintain sanitizer at correct concentrations when being used to sanitize. -P. Observed dish machine at 0ppm. Food employee had been using dish machine during initial parts of inspection. CDI- PIC primed unit after discussion with EHS. Ensure dish machine is primed prior to attempting sanitizing equipment.
For more information please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg and How to Test Sanitizer https://youtu.be/y0SjmnabFaY |
|
23
|
0
|
Proper date marking & disposition |
Yes |
No
|
No |
3-501.18 Discard the food requiring date labels once time/temperature window has expired, if it has not been labeled, or if the label is incorrect. -P The PIC should train and assign staff to monitor date marking to prevent the use of food products that are no longer in compliance with 3-501.17 (A), (B), or (C). Observed Kimchi originally prepped on 2/18. Pan of kimchi held in flip top without date. CDI- PIC voluntarily discarded all pans prepped on this date.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Date Marking Food Safely https://youtu.be/BOPsSNUajYs . |
|
43
|
0.50
|
In-use utensils: properly stored |
Yes |
Yes
|
No |
3-304.12 (F) Containers of water used for storing in-use utensils must be maintained at a temperature of at least 135 F and cleaned at least every 24 hours or when container has accumulated soil or residue. Observed in use utensils stored in water held below 135F. CDI- PIC emptied container and removed items to dish machine. *REPEAT* |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent
cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance. Observed rusted shelving in walk-in units, lower shelves of prep tables. *REPEAT*
4-501.11 Maintain equipment in good repair. Observed gaskets on 3D prep unit, door of walk-in cooler in disrepair. *REPEAT* |
|
49
|
1
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed tight areas of flip tops unclean. *REPEAT* |
|
51
|
0
|
Plumbing installed; proper backflow devices |
No |
No
|
No |
5-205.15 Maintain a plumbing system in good repair. Observed 3-comp sink constantly dripping during inspection. |
|
56
|
0
|
Meets ventilation & lighting requirements; designated areas used |
No |
No
|
No |
6-303.11 Provide required lighting intensity. Observed lighting in walk-in freezer too low. Increase to above 10 foot-candles. |