|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf. For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . Deli slicer had some dried meat residue behind the blade and it was stored as clean. Stack of metal pans had visible food residue on them and were stored as clean. CDI - Deli slicer and pans washed, rinsed and sanitized during inspection. |
|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
Yes
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . Cream spinach cooling in deep metal pan at beginning of inspection. Use shallow pans to spread TCS foods out for rapid cooling. CDI - Cream spinach moved to 3 shallow pans and were below 70F within 2 hours. REPEAT |
|
44
|
0
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing. 1 stack of clean metal pans stacked while still wet. Allow utensils to air dry before stacking. 0 pts. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Torn gaskets present on sandwich cooler drawers. Replace torn gaskets. 0 pts. |
|
51
|
0
|
Plumbing installed; proper backflow devices |
Yes |
No
|
No |
5-202.14 Prevent backflow or back siphonage prevention devices installed shall meet American Society of Sanitary Engineering standards. -P Spray "gun" attachment on mop sink hose. Mop sink faucet only has atmospheric backflow preventer. Either install a backflow preventer rated for continuous pressure, or remove the attachment after each use. CDI - Attachment removed during inspection. 0 pts. |