|
21
|
3
|
Proper hot holding temperatures |
Yes |
Yes
|
No |
3-501.16(A)(1) Maintain TCS foods in hot holding at 135F or above. -P Observed multiple items such as rice, rice and beans hot held below 135 F. See temp chart. REPEAT. CDI - PIC reheated food to 165.
For more information, please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ . |
|
22
|
3
|
Proper cold holding temperatures |
Yes |
Yes
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P Observed multiple items such as milk and unsalted butter cold held above 41 F. See temp chart. REPEAT. CDI - PIC voluntarily discarded.
For more information, please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ . |
|
38
|
0
|
Insects & rodents not present; no unauthorized animals |
No |
No
|
No |
6-202.15 Protect outer openings of establishment from insect or rodent entry. Observed front door propped open without pest barrier. |
|
43
|
0
|
In-use utensils: properly stored |
Yes |
No
|
No |
3-304.12 (F) Containers of water used for storing in-use utensils must be maintained at a temperature of at least 135 F and cleaned at least every 24 hours or when container has accumulated soil or residue. Observed utensils in water at 117 F. CDI - PIC reheated water. |
|
45
|
0
|
Single-use & single-service articles: properly stored & used |
Yes |
No
|
No |
4-903.11(A)(C) Store single-use and single-service articles in a clean, dry location; where they are not exposed to splash, dust, or other contamination; and at least 6 inches above the floor. Observed boxes of single use food trays stored on floor. CDI - PIC moved to shelf. |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Observed non-working reach-in unit in facility. Observed gasket covered in duct tape on reach-in unit.
4-402.11 Fixed equipment shall be spaced to allow access for cleaning around the equipment or sealed to adjoining equipment or walls. Observed prep sink pulling away from the wall and no longer sealed to adjoining wall.
4-502.11(A) Maintain utensils in good repair. Observed knife with chips along blade. Observed painted knife with chipping paint on blade.
4-501.12 Resurface or replace cutting surfaces that can no longer be effectively cleaned and sanitized. Observed cutting board with burns and deep cuts. |
|
49
|
1
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed rusted shelving in reach in unit. Observed food debris on non-food contact surface of clean food equipment. REPEAT. |