|
8
|
2
|
Hands clean & properly washed |
Yes |
No
|
No |
2-301.14 (H) Wash hands before donning gloves to initiate a task that involves working with food.- P.
Observed food employee fail to wash hands prior to donning gloves after entering from outside of establishment. CDI- EHS discussed, PIC had employee remove gloves and wash hands before replacing.
2-301.14 (I) Wash hands after engaging in other activities that contaminate hands. -P
Observed food employee fail to wash hands after picking item up off ground. CDI- PIC had employee stop task and wash hands. |
|
22
|
0
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P.
Observed Cole slaw temping above 41F in flip top due to being held in unit prior to being cooled, per regular procedures. CDI- PIC removed item to rapidly cool due to being within 4 hours.
For more information, please visit: www.mecknc.gov/foodsafety or view our training videos at the following weblinks: What are TCS Foods https://www.youtube.com/watch?v=q0iLZb7v0UM and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ . |
|
33
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf. Observed establishment cooling TCS food in active flip top unit. CDI- EHS discussed with PIC, PIC removed item to rapidly cool.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-501.11 Maintain equipment in good repair. Observed gasket in need of repair or replacement on cold holding unit on frontline. *REPEAT*
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent
cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance. Observed rusted shelving on lower prep shelves on cookline. EHS discussed looking into corrosion resistant paint. *REPEAT* |