|
6
|
0
|
Hands clean and properly washed |
Yes |
No
|
No |
2-301.12. Follow the cleaning procedure to adequately wash your hands. Use warm water, soap, scrub 15 secs, rinse, and dry without recontaminating hands. -P -Observed 1 food employee turn faucet off with their bare hands after handwashing. CDI by instruction. |
|
8
|
0
|
Handwashing sinks, supplied and accessible |
Yes |
No
|
No |
5-205.11 Maintain access to handsinks. Handsinks may only be used for handwashing.-Pf - Observed chemical bottles stored on handwashing sinks behind bar. CDI, chemicals relocated for proper storage. |
|
21
|
1.50
|
Proper date marking and disposition |
Yes |
Yes
|
No |
3-501.17 Date mark/label all TCS foods that are ready-to-eat once opened or prepared and held more than 24hrs. -Pf -Observed bbq portioned out at 1:00pm yesterday according to PIC in container not date marked and tomatoes not date marked. CDI, foods voluntarily discarded by PIC. |
|
31
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
Yes
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf - Observed recently prepared diced and sliced tomatoes as well as guacamole cooling in prep cooler. CDI, items transfered to walk in units uncovered to rapidly cool. Proper cooling methods and equipment discussed with PIC. |
|
42
|
0
|
Utensils, equipment and linens: properly stored, dried and handled |
No |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing. Observed some pans being wet stacked at dish area. |
|
45
|
0
|
Equipment, food and non-food-contact surfaces approved; cleanable, properly designed, constructed and used |
No |
No
|
No |
4-501.11 Good Repair and Proper Adjustment-Equipment - C- Observed front rinse gauge not moving at dish machine. Wash and final rinse gauges reaching requirements and chlorine testing properly. Ensure all gauges calibrated at chemical dish machine and operating per manufacturer's specifications. |