|
20
|
1.50
|
Proper cooling time & temperatures |
Yes |
No
|
No |
3-501.14(A) Quickly cool cooked foods within 2 hours from 135F to 70F; and within a total of 6 hours from 135F to 41F. -P. Observed caramelized onions and beef burger patties fail to cool through parameters to 41F or below. CDI- PIC voluntarily discarded items.
For more information please visit: www.mecknc.gov/foodsafety or view our training videos at the following weblinks: What are TCS Foods https://www.youtube.com/watch?v=q0iLZb7v0UM and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
33
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf. Observed caramelized onions and beef burger patties fail to cool through parameters due to being held in deep densely packed containers with tight fitted lidding while in a back up cold holding unit temping above 41F. CDI- See item #20.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
44
|
0.50
|
Utensils, equipment & linens: properly stored, dried & handled |
Yes |
Yes
|
No |
4-903.11 (A) Store cleaned equipment, utensils, linens in a clean, dry location; where they are not exposed to splash, dust, or other contamination; and at least 6 inches above the floor. Observed cleaned not in-use sheet pans stored on speed rack with visible debris. CDI- PIC removed items to clean area. *REPEAT* |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-101.19/4-202.16 Non FOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent
cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance.
Observed aluminum foil being used to cover prep table shelving. Foil was unclean and needing to be replaced. Ensure non food-contact surfaces exposed to splash, spillage, or other food soiling is corrosion-resistant, nonabsorbant, smooth and easily cleanable. |