|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-703.11 After cleaning, equipment, food contact surfaces, and utensils shall be sanitized using an approved method.-P Observed the dish washing machine sanitizing at zero ppm chlorine. CDI, establishment set up 3 compartment sink for wash, rinse, and sanitizing dishes. Establishment does not have a high volume of dishes to wash and can use the 3 comp sink until the dish washer is repaired.
For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
22
|
1.50
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P Observed sliced cheese, sliced corn beef, sliced brisket all above 41 f at the make unit. Unit is working fine, all three products were stocked above the fill line of the pan. Employee advised they products were from last night. CDI, products discarded.
For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ . |
|
48
|
0.50
|
Warewashing facilities: installed, maintained & used; test strips |
No |
No
|
Yes |
4-302.14 Provide a test kit that accurately measures sanitizer concentrations. -Pf. Observed no chlorine or quat test strips in the establishment. Obtain both within 10 days. |
|
49
|
0.50
|
Non-food contact surfaces clean |
No |
Yes
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed refrigerator gaskets in need of cleaning. Points decreased due to different cleaning issue from last inspection. |