|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-601.11(A) Equipment food contact surfaces and utensils shall be clean to sight and touch. -Pf. Observed multi-use dicer stored as clean with visible food residue present on blade. CDI - PIC moved dicer to three compartment sink to be wash, rinsed, and sanitized. (1.5)
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
28
|
1
|
Toxic substances properly identified stored & used |
Yes |
No
|
No |
7-201.11 Store toxic materials to avoid contamination of food, equipment, utensils, linens, and single-service/use items. -P Observed sanitizer bucket being stored on prep table with deli slicer and utensils. CDI - PIC removed sanitizer bucket and placed it in approved storage area below prep table. (0) |
|
41
|
0.50
|
Wiping cloths: properly used & stored |
Yes |
No
|
No |
3-304.14(B) Hold in-use wiping cloths in properly concentrated sanitizer between uses. Observed wiping cloths stored in sanitizer at 50 ppm. PIC stated chemical company has been notified to come to facility to check concentration of sanitizer from dispenser. Facility has been diluting sanitizer due to it being dispensed at a strong concentration. CDI - PIC removed sanitizer bucket to make fresh sanitizer between 200-400ppm per manufacturer instructions. (0) |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Observed ripped gasket on single door reach in unit. (0) |
|
49
|
0
|
Non-food contact surfaces clean |
No |
No
|
No |
4-601.11(C ) Keep non food contact surfaces of equipment clean to avoid build up of dust, food residue or debris.4-602.13 Non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. Observed black residue build up present on make table gaskets. Increase cleaning frequency to avoid accumulation. (0) |