|
|
| CDI=Corrected During Inspection | |
R=Repeat Violation | |
VR=Verification Required | |
|
|
| Violation Item
| Demerits
| Violation Description
| CDI | R | VR |
|
|---|
|
2
|
1
|
Certified Food Protection Manager |
No |
Yes
|
No |
REPEAT
2-102.12 PIC shall demonstrate knowledge by being a certified food protection manager. For more information on becoming a certified food protection manager please visit: http://meck.co/FoodSafety. Observed PIC with a food protection manager certification that expired in 2021. |
|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
No |
No
|
No |
4-602.11 (E )Clean the equipment and utensils used with nonTCS foods as required to avoid contamination. Observed ice machine with black build up. Clean as needed. |
|
19
|
0
|
Proper reheating procedures for hot holding |
Yes |
No
|
No |
3-403.11 (A),(D) Reheat all TCS foods to 165F within 2 hours if food is to be hot held until service. -P. Observed Mac and cheese from yesterday, still reheating after 2 hours below 165F. CDI: PIC voluntarily discarded. No points taken today due to only being one item. |
|
25
|
0.50
|
Consumer advisory provided for raw/ undercooked foods |
No |
No
|
Yes |
3-603.11 (C )(2) A Consumer Advisory Reminder shall include asterisking the food item to a footnote that states: * Consuming raw or undercooked meats, poultry, seafood, shellfish, or eggs may increase your risk of foodborne illness.- Pf. Observed consumer advisory on breakfast menu that does not have the reminder statement. VR required within 10 days. |
|
44
|
0
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing. Observed cups at the wait station wet stacked. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.12 Resurface or replace cutting surfaces that can no longer be effectively cleaned and sanitized. Observed multiple cutting boards with deep cuts and grooves. Resurface or replace. |
|
48
|
0.50
|
Warewashing facilities: installed, maintained & used; test strips |
No |
No
|
Yes |
4-302.13 (B) Provide an approved Max/Min thermometer for testing sanitizing temperatures in hot water warewashing machines. The thermometer must be readily accessible. -Pf. Observed facility without a max/min thermometer for the dish machine. VR required within 10 days. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.11 Floors, walls, and ceilings including the attachments such as soap and towel dispensers; light fixtures; and heat/ac vents shall be maintained in good repair. Observed missing ceiling tiles near dish machine area. |
|