|
22
|
0
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P Observed some containers of spinach dip and some containers of cous cous salad in the grab and go cooler above 41F. All other items at or below 41F. Ensure product is loaded further back to promote air flow. CDI: Items above 41F voluntarily discarded.
For more information, please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ . |
|
23
|
1.50
|
Proper date marking & disposition |
Yes |
No
|
No |
3-501.18 Discard the food requiring date labels once time/temperature window has expired, if it is not been labeled, or if the label is incorrect. -P For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Date Marking Food Safely https://youtu.be/BOPsSNUajYs . Observed sliced deli meats dated for 4/7 in the cooler drawers. Meats were turkey, ham, roast beef, Cuban sets, and club sets. CDI: Items voluntarily discarded. |
|
24
|
1.50
|
Time as a Public Health Control; procedures & records |
No |
No
|
No |
3-501.19(B) (1) Follow written procedures for foods held using Time as a Public Health Control (TPHC) for 4 hours. Food shall have an initial temperature of 41 F when removed from cold holding temperature control or 135 F or greater when removed from hot holding temperature control. -P Observed no times written for eggs and hot items at the stove that are held on TPHC. |
|
43
|
0
|
In-use utensils: properly stored |
No |
No
|
No |
3-304.12 (B) In-use utensils for food that is not TCS must be stored with their handles above the top of the food within containers or equipment that can be closed. Observed handle of scoop in breading on dry storage rack. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
Yes
|
No |
6-101.11/6-201.11 Floors, walls and ceilings shall be designed, constructed, and installed so they are smooth and easily cleanable. Floors shall be non-absorbent in areas subject to moisture. Observed some areas of flooring throughout facility where sealant is chipped/picking up. REPEAT VIOLATION PIC stated that they are working with a contractor to get the flooring resealed. The contractor is finishing up at the Levine store and then will come work on this one. No hard date set yet.
Improvement made from previous inspection. |