|
2
|
1
|
Certified Food Protection Manager |
No |
Yes
|
No |
2-102.12 PIC shall demonstrate knowledge by being a certified food protection manager. For more information on becoming a certified food protection manager please visit: http://meck.co/FoodSafety No employee present during inspection with ANSI food protection manager certification. REPEAT |
|
10
|
1
|
Handwashing sinks supplied & accessible |
Yes |
Yes
|
No |
5-205.11 (A) A handwashing sink shall be maintained so that it is accessible at all times for employee use Pf. Water bottles observed in back hand washing sink. Do not store items in hand washing sink. Only use for hand washing. CDI - PIC removed items. REPEAT |
|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
No |
No
|
No |
4-602.11 (E )Clean the equipment and utensils used with nonTCS foods as required to avoid contamination. Heavy buildup on 1 soda nozzle. Clean more frequently. 0 pts. |
|
21
|
3
|
Proper hot holding temperatures |
Yes |
Yes
|
No |
3-501.16(A)(1) Maintain TCS foods in hot holding at 135F or above. -P For more information please visit: http://meck.co/FoodSafety or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Safe Food Temperatures https://youtu.be/tXP09IK-1TQ . 2 containers of chicken wings and 1 pizza measured below 135F in hot holding. TCS foods in hot holding shall be at least 135F. CDI - Items placed on temporary TPHC and will be discarded within 2 hours. REPEAT |
|
36
|
0.50
|
Thermometers provided & accurate |
No |
No
|
Yes |
4-302.12 Provide an accessible thermometer for use. Provide a thin probe thermometer for accurate measure of thin foods.-Pf . For information on how to properly calibrate a thermometer please visit: http://meck.co/FoodSafety or view our training video at the following weblink: https://youtu.be/IxXix712KkI No thermometer at establishment. VR - Verification required within 10 days that establishment gets a thermometer with a thin probe thermometer. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
No
|
No |
4-501.11 Maintain equipment in good repair. Torn gasket present on reach-in freezer door. 0 pts. |
|
55
|
0
|
Physical facilities installed, maintained & clean |
No |
No
|
No |
6-501.11 Floors, walls, and ceilings including the attachments such as soap and towel dispensers; light fixtures; and heat/ac vents shall be maintained in good repair. Floor damage around grease trap lid. Repair. 0 pts. |