|
2
|
1
|
Certified Food Protection Manager |
No |
Yes
|
No |
2-102.12 (A) PIC shall demonstrate knowledge by being a certified food protection manager. No employee present with active ANSI food protection manager certification. At least 1 employee shall be present during all hours of operation with active ANSI food protection manager certification. REPEAT
For more information on becoming a certified food protection manager please visit: www.mecknc.gov/foodsafety |
|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-602.11 (C ) Equipment food contact surfaces and utensils shall be cleaned, and sanitized per 4-702.11/4-703.11, throughout the day at least every 4 hours, unless otherwise indicated in the Food Code, P. Deli slicer was in use since 9 or 10AM according to PIC and had not yet been cleaned and sanitized. In-use utensils and food-contact equipment must be washed, rinsed and sanitized every 4 hours. CDI - PIC educated on food-contact surface cleaning frequency and she began breaking down slicer to clean during inspection.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
44
|
0
|
Utensils, equipment & linens: properly stored, dried & handled |
No |
No
|
No |
4-903.11 (B) After cleaning and sanitizing, clean equipment and utensils shall be stored in a self-draining position that allows air drying and covered or inverted. Containers on clean dish shelf were stacked while still wet. Allow utensils to adequately air dry before stacking. 0 pts. |