|
2
|
1
|
Certified Food Protection Manager |
No |
Yes
|
No |
2-102.12 (A) PIC shall demonstrate knowledge by being a certified food protection manager. Observed facility without a food protection manager onsite during inspection. REPEAT
For more information on becoming a certified food protection manager please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation |
|
16
|
0
|
Food-contact surfaces: cleaned & sanitized |
Yes |
No
|
No |
4-602.11 (C ) Equipment food contact surfaces and utensils shall be cleaned, and sanitized per 4-702.11/4-703.11, throughout the day at least every 4 hours, unless otherwise indicated in the Food Code, P- Observed meat saw with visible accumulation of food debris along food-contact surfaces. PIC states saw was used last night and was not cleaned after use. -CDI- PIC properly cleaned the saw during the inspection.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: Sanitizing Solutions - https://youtu.be/ykP2mr9CtRg , How to Test Sanitizer https://youtu.be/y0SjmnabFaY , and Cleaning and Sanitizing Food Contact Surfaces https://youtu.be/av1Rbh-lh08 . |
|
20
|
0
|
Proper cooling time & temperatures |
Yes |
No
|
No |
3-501.14(B) Quickly cool TCS foods that are prepared from room temperature ingredients. Food must be to 41F within 4 hours. -P- Observed ground peeled beef knuckles not reach cooling parameters. Beef knuckles were observed at 43F after cooling overnight in WIC. PIC stated item was prepared in the meat grinder last night at room temperature, then immediately placed in tightly sealed bag in WIC. All other items in WIC were 41F or below. -CDI- PIC opened the bag and placed item in freezer for rapid cooling.
For more information, please visit: www.meckncgov/foodsafety or view our training videos at the following weblinks: What are TCS Foods https://www.youtube.com/watch?v=q0iLZb7v0UM and Cooling Food Safely https://www.youtube.com/watch?v=P6x8b1ZVOxU . |
|
33
|
0
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
No
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf- Observed ground peeled beef knuckles not reach cooling parameters in WIC. Knuckles were ground in meat grinder at room temperature last night, then immediately placed in tightly sealed plastic bag in WIC, preventing proper air circulation. Knuckles were observed at 43F. -CDI- PIC placed item in freezer for rapid cooling.
For more information, please visit: https://health.mecknc.gov/envhealth/food-and-facilities-sanitation or view our training videos at the following weblinks: What are TCS Foods https://youtu.be/bRvqAETDjQU and Cooling Food Safely https://youtu.be/P6x8b1ZVOxU . |
|
48
|
0.50
|
Warewashing facilities: installed, maintained & used; test strips |
Yes |
No
|
No |
4-501.19 During manual warewashing, maintain the wash solution at a minimum of 110F or as otherwise allowed by the detergent manufacturer label. -Pf- Observed hot water at 3-compartment sink reach a maximum of 109F during manual warewashing. -CDI- PIC adjusted tankless water heater and EHS observed hot water reach 115 at 3-compartment sink by end of inspection. |
|
56
|
0.50
|
Meets ventilation & lighting requirements; designated areas used |
Yes |
Yes
|
No |
6-305.11/6-501.110 Designate and use an area for the orderly storage of employees' clothing and possessions. -Observed employee personal food stored above commercial food items in reach-in freezer. -CDI- PIC corrected storage order. |