|
21
|
0
|
Proper hot holding temperatures |
Yes |
No
|
No |
3-501.16(A)(1) Maintain TCS foods in hot holding at 135F or above. -P Observed patty sausage at a temperature of 125F. CDI- Patty sausage was reheated during the inspection. |
|
22
|
3
|
Proper cold holding temperatures |
Yes |
Yes
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. - P. Observed foods inside of prep unit above 41F. See temperature chart. Some items were being held above the prep unit fill line. |
|
33
|
0.50
|
Proper cooling methods used; adequate equipment for temperature control |
Yes |
Yes
|
No |
3-501.15 Quickly cool foods. Use methods such as open/vented shallow pans, large ice baths and active stirring. Cold air must flow around product to remove the heat. -Pf For more information on proper cooling procedures please visit: http://meck.co/FoodSafety Observed pasta recently prepared placed inside the reach in unit to cool. Ensure that foods are being properly cooled using rapid cooling equipment. Gyro meat was recently chopped and placed directly inside of the reach in unit. |
|
37
|
1
|
Food properly labeled: original container |
Yes |
Yes
|
No |
3-302.12 Label all working containers of food (oils, spices, salts, flour, sugar) except food that is easy to identify such as dry pasta. Observed corn meal inside of secondary bus containers without label present. CDI- Foods were labeled during the inspection. No escalation of points due to improvement. |
|
43
|
0
|
In-use utensils: properly stored |
Yes |
No
|
No |
3-304.12 (C ) Store in-use utensils on a clean portion of the food preparation table or cooking equipment. The utensils and storage surface must be cleaned and sanitized every 4 hours. Observed knives stored in between table and warmer unit during the inspection. Ensure that knives are stored in a manner that prevents contamination. |