|
8
|
1
|
Handwashing sinks, supplied and accessible |
Yes |
No
|
No |
5-205.11 Maintain access to handsinks. Handsinks may only be used for handwashing.-Pf-Observed bread racks blocking the handsink at the beginning of inspection. CDI-Racks removed away from the handsink. |
|
20
|
1.50
|
Proper cold holding temperatures |
Yes |
No
|
No |
3-501.16(A)(2) Maintain TCS foods in cold holding at 41F or less. -P-Observed tomatoes, cut onions, and lettuce all above 41F in the flip top unit. Observed chicken in the tall reach in unit holding above 41F.CDI-PIC moved items to reach in freezer uncovered. |
|
37
|
1
|
Contamination prevented during food preparation, storage and display |
No |
No
|
No |
3-305.11 Store food in a clean, dry location, not exposed to contamination. Keep at least 6 inches above the floor.-Observed flour, cooking oil, and containers of cake fillings stored on the floor during inspection. |
|
39
|
0
|
Wiping cloths: properly used and stored |
No |
No
|
No |
3-304.14(B) Hold in-use wiping cloths in sanitizer between uses.-Observed wet wiping cloths stored under the grill.
3-304.14(E) Store sanitizer containers used for wet wiping cloths off the floor.- At the beginning of inspection, observed sanitizer buckets stored on the floor. |
|
42
|
0
|
Utensils, equipment and linens: properly stored, dried and handled |
No |
No
|
No |
4-901.11(A) Air dry equipment and utensils after cleaning and sanitizing.-Observed plastic containers stacked wet with standing water inside. Observed the food processor stored on the dish rack with standing water inside. |
|
43
|
0.50
|
Single-use and single-service articles; properly stored and used |
No |
No
|
No |
4-903.11(A) Store single-use and single-service articles to prevent contamination and at least 6 inches off the floor.-Observed plastic forks and spoons stored in a soiled bin uncovered. |
|
47
|
0
|
Non-food-contact surfaces clean |
No |
No
|
No |
4-601.11(C )/4-602.13 Keep the equipment clean to avoid build up of dust, food residue or debris.-Cleaning is needed in between the gaskets of flip top. |
|
54
|
0.50
|
Meets ventilation and lighting requirements; designated areas used |
No |
No
|
No |
4-204.11 Ventilation Hood Systems, Drip Prevention - C-Observed heavy build up of oil accumulating on the grease hoods. |