|
16
|
1.50
|
Food-contact surfaces: cleaned & sanitized |
No |
No
|
Yes |
4-501.112 Provide a minimum of 165F rinse water for sanitizing on stationary rack machines and 180F rinse water for all other machines. Pf. The dishmachine is not getting up to 160F on the dish temp thermometer. EHS ran the machine 8 times and each time it was ran the temperature ranged from 144-149F. EHS noticed that none of the temperature gauges were moving either. Wash gauge was reading 145F and was supposed to be 150F. The Rinse gauge was reading 138F and it is supposed to be 160F. The Final rinse gauge was reading 141F and it is supposed to be 180F. The gauge is supposed to be marked under number 46, but EHS is marking under this today. EHS will have to come back within 10 days to check on the machine. (10 days will fall during the school’s spring break). If parts must be ordered, have a receipt showing where parts have been ordered. Email EHS at Christin.coats@randolphcountync.gov the receipt if it cannot be fixed by the end of the 10 days). |
|
21
|
1.50
|
Proper hot holding temperatures |
Yes |
No
|
No |
3-501.16 Maintain TCS foods in hot holding at 135F or above. P. Beans in the hot cabinet near the ice machine was holding 118-130F. Beans were reheated during the inspection to 181F. Nothing else in the hot cabinet was off temperature. CDI by reheat. |
|
47
|
0
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
No |
4-501.11 Equipment shall be maintained in good repair. Repair the issue causing ice to form on the right pipe of the walk-in freezer. Ice is also on the fan covers and on the right wall of the walk-in freezer. Manager has place pans underneath to catch the ice. This is perfect to prevent the boxes from getting ice on them from the leak. |