|
47
|
0.50
|
Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used |
No |
Yes
|
Yes |
4-501.11 Equipment shall be maintained in good repair. Address issue causing ice to form on the left pipe, middle pipe, and on the floor in the walk-in freezer. Replace the torn gasket on the bottom door of the hot cabinet that faces the serving line. The gasket is torn on the top corner.
4-202.16 Nonfood-contact surfaces shall be free of unnecessary ledges, projections, crevices, and constructed to allow easy cleaning and facilitate maintenance. The shelves in the walk-in cooler are beginning to rust. Eliminate rust on the shelves. EHS gave the manager a few options on how this can be repaired.
4-202.11 Multiuse food-contact surfaces shall be smooth, in good repair, free of sharp angles, and finished to have smooth seams and joints. Pf. Pay close attention to the sectionizer pusher piece. There are small pieces of plastic that is being cut and parts of the plastic are separated. When the blade cuts the plastic this could cause plastic to get into the food. The establishment has multiple of the pusher pieces, so get rid of the one that is in disrepair. Manager discarded the pusher piece during the inspection. CDI during inspection |